FESTO Rotary actuator DRRD

CP range is versatile, modular, and has scotch yoke actuators in double-acting and spring-return configurations. The compact and efficient design yields surprisingly high torques even at low pressures. Using design concepts from Rotork’s GP and LP actuators, the CP range brings heavy-duty actuator qualities to small, quarter-turn applications.

The wider PAX range is made up of linear actuators and motorized regulators. Common applications include pump stroke control, valve control, test equipment, and the automation of mechanical spring-loaded pressure regulators. PAX1 linear actuators are low-powered; their use dramatically reduces power usage while maintaining position. This low power benefit makes them an environmentally sensible choice, while simultaneously increasing the efficiency of pilot-operated valve automation within natural gas and water distribution systems.

• • ・With auto switch (MDSU series: MDSUA, MDSUB)
    ・It is possible to move the auto switch mounting position as desired
    　(Only the side ported is selectable when a switch is installed.)
    ・Connection port position: Select from side ported or axial ported
    ・Table deflection accuracy: 0.03 mm or less (MSUA)
    ・Angle adjustable, ±5º at each rotation end (Double: ±2.5º)
    ・Integrated table and rotary actuator

• ・Each of the units below for the CRB2 series can be mounted to the CRB series.
  ・The position of the chamfered portion of the shaft can be easily checked using the rotating angle indicator. (Only for the CDRB with auto switch)
  ・Easy-to-adjust start and end positions with the angle adjustment bolts (as standard)
  ・Piping, wiring, and angle adjustment can be performed on the same side for easier mounting.
  　Overall length: 44% shorter, Weight: 48% lighter
  ・Features a compact body with a built-in angle adjustment unit and auto switch unit (Size: 20, 30, 40)