FESTO Tandem cylinder DNCT

RCEL electric actuators provide efficient, high-performance automation of quarter-turn valves. They are ideally suited for on/off control applications and provide IP67 and NEMA 4&6 certifications for environmental protection. Housed within anodized and epoxy-painted aluminum.

The wider PAX range is made up of linear actuators and motorized regulators. Common applications include pump stroke control, valve control, test equipment, and the automation of mechanical spring-loaded pressure regulators. PAX1 linear actuators are low-powered; their use dramatically reduces power usage while maintaining position. This low power benefit makes them an environmentally sensible choice, while simultaneously increasing the efficiency of pilot-operated valve automation within natural gas and water distribution systems.

•            Compact and lightweight

• •           Weight: Max. 28% reduction (940 gr → 680 g)
  •           Height: Max. 28% reduction (54 mm → 39 mm)
    Enlarged center hole diameter for piping
    The adjustable rotation time range is expanded. (0.2 to 2.0 s/90º)
    Compared with the existing model (MSQ20)
    (ø9 mm → ø12 mm)
    Can be used at lower speeds compared with the existing model

• ・Each of the units below for the CRB2 series can be mounted to the CRB series.
  ・The position of the chamfered portion of the shaft can be easily checked using the rotating angle indicator. (Only for the CDRB with auto switch)
  ・Easy-to-adjust start and end positions with the angle adjustment bolts (as standard)
  ・Piping, wiring, and angle adjustment can be performed on the same side for easier mounting.
  　Overall length: 44% shorter, Weight: 48% lighter
  ・Features a compact body with a built-in angle adjustment unit and auto switch unit (Size: 20, 30, 40)